Lenkgetriebe + Panhardstab Verstärkungskit Jeep JK ab BJ 07 Front Trackbar and Sector Shaft Reinforcement Kit | 2007-2017 Wrangl

Lenkgetriebe und Panhardstab Verstärkungskit 
passend Jeep^® Wrangler JK ab BJ 07

Front Trackbar and Sector Shaft Reinforcement Kit | 2007-2017 Wrangler JK

Front Track Bar and Sector Shaft Reinforcement Kit; Front; Strengthens OE trackbar mount; Supports sector shaft; Connects driver- and passenger-side chassis rails; Heavy gauge and DOM steel tube construction; Powdercoated, anodized and bare metal; Welding required; Kit

Large diameter tires and hydraulic-assist steering can play havoc on Wrangler JK models if the front track bar and steering box are not reinforced. The chassis can only flex so far before something has to give. The factory track bar mount on the chassis is particularly vulnerable to extreme forces. Crank on the steering wheel too hard and you risk tearing the OE mount completely off of the frame.

Unfortunately, the output shaft on the steering box is even more troublesome. The internal bearings that support the shaft are poorly positioned and low-quality causing them to wear out very quickly. Some indicators include a noticeable clunk noise and excessive play in the steering wheel. And since the OE steering box is not serviceable, the only option is to replace the entire assembly.
 

Heavy-duty bracket strengthens and supports weak OE track bar mount on chassis
Increases load capacity to accommodate large tires and hydraulic assist steering
Heavy-duty bearing fixture stabilizes and supports steering box output shaft to prevent failure
External bearing supports sector shaft below pitman arm for double-shear strength
Heavy-duty tubular support strut connects left and right side of chassis together
Dramatically improves steering responsiveness for greater control, handling and driver confidence

1. Requires 2.0 in. suspension lift or greater.

2. Requires OE type steering box.

3. Not compatible with TeraFlex, Rubicon Express, Rock Krawler and Synergy track bars.

4. Not compatible with frame-mounted track bar drop brackets.

5. Not compatible with some drag link flip kits - call JKS for details.

6. Not compatible with factory track bar when combined with an axle mounted track bar relocation bracket " call JKS for details.